Install Transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clutch Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

Transmission.
See Installing the transmission .

Install

Wiring. Clamp cable trunks and ground lead.
Install new quick-release connector on clutch line terminal.
Lubricate rubber seal with a drop brake fluid before joining.

CAUTION: Ensure everything is clean when working with hydraulic components.
Check that striker plate is located in adapter.
Then secure clutch line in adapter so that striker plate clicks into place.

Install clutch line in holder on side of transmission as illustrated.
Remove hose clip from hose in clutch master cylinder.
Bleed system and fill brake fluid if required.
Use Volvo Genuine parts brake fluid only.