Checking Clutch Slave Cylinder And Throwout Bearing
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Clean clutch slave cylinder.
- Check signs of wear and play on clutch release bearing.
The plain surface pressing down on clutch must be free from deep ridges.
- Check for signs of wear and cylinder seal, also protective bellow.
Do not remove the protective bellow!
Clutch slave cylinder with clutch release bearing and pipe are replaced as an assembly.