Checking the Clutch Slave Cylinder And Throwout Bearing
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Clean the clutch cylinder.
Check for signs of wear, play and noise in the throwout bearing. There must be no deep grooves on the flat surface which presses on the clutch.
Check for signs of wear and sealing at the cylinder and protective bellow.
The clutch cylinder and pipe are replaced as complete units.