Terminal removal tool

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

The terminal removal tool is used for removing cable terminals from connector housings.

Supplementary kits may be introduced later.

Fig 1: Identifying Terminal Removal Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Terminal removal tool, p/n 9814228

For cable terminals type 2.8 Tab steel sws, 2.8 Timer, 2.8 Timer sws, and 6.3 Timer.

The tool is used when the housing cavity opening has two extraction grooves.

Fig 2: Identifying Terminal Removal Tool 9814229

Courtesy of VOLVO CARS OF NORTH AMERICA.

Terminal removal tool, p/n 9814229

For cable terminal types: 2.8 Tab, 2.8 Tab sws, 2.8 Timer and 6.3 Tab/Receptacle terminal.

The tool is used when the housing cavity opening has one extraction groove.

Fig 3: Identifying 2.1 Pin/Pin Sockets And 3.5 Pin/Pin Sockets

Courtesy of VOLVO CARS OF NORTH AMERICA.

Terminal removal tool, p/n 9814230

For cable terminals of type 2.1 Pin/Socket and 3.5 Pin/Socket.

The tool is used for round housing cavity openings.