LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Emission Control, Turbocharger - Removal, Replacement And Installation (Convertible) >> Check/Replacing Exhaust System (B5234T3; B5254T; 1998-1999) >> Exhaust manifold replacement, right-hand drive 850 >> Right drive shaft, removal >> Remove the drive shaft from the hub

Remove the drive shaft from the hub

Fig 1: Identifying Holder
GLL125999Courtesy of VOLVO CARS OF NORTH AMERICA.

Install holder 9995563 to hold down the control arm.

Turn and fold out spring strut. Tap on the drive shaft end with a plastic or copper hammer and pull drive shaft out of the hub.

Clean off traces of metal adhesive from the spline joint (hub-drive shaft).