Checking Signal From Light Switch (1998-2004): Verification: Notes
HINT: After carrying out the repair, check that the fault has been remedied as follows:
- Ignition off.
- Reconnect connectors, reinstall components.
- RTI control module connected.
- Ignition on
- Activate the RTI system with the remote control.
Switch the car lighting on and off with the light switch, the display lighting should change.
- Activate the RTI system with the remote control.
Is this function OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Fault-tracing information