Checking Remote Control Function (1999-2004): Verification: Notes
HINT: After carrying out the repair, check that the fault has been remedied as follows:
- Ignition off.
- Reconnect connectors, reinstall components.
- Ignition on.
- Establish communication with the RTI system by reading diagnostic trouble codes (DTC) for example. The display should fold up.
- Interrupt communication with RTI control module.
- Do not switch off ignition.
Try to switch RTI system off with remote control.
Is the remote control OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Fault-tracing information