Rear Wheel Hub, Replacing: Installation
NOTE:
For tightening torque, see Tightening torque and Tightening torque .
Installing the hub
Install:
- the hub to the wheel spindle
Use new screws. Tighten. See Tightening torque .
- the wheel sensor (M6). Tighten. See Tightening torque .
Removing the tensioner
Remove the tensioner. See Tensioner 999 5659, User instructions .
Installing the brake disc and brake calliper
Install:
- the brake disc
- the brake disc locating pin/screw (M6). Tighten. See Tightening torque .
- the brake caliper
- the brake calliper mounting screws.
Use new screws. Tighten. See Tightening torque .
- the wheel sensor cable to the retainer on the brake hose.
Installing the rear wheel
Install the rear wheel. See Installing wheels .