LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> V70 XC >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - Removal, Replacement And Installation (XC) >> Intake And Exhaust Manifolds (B5244T3; 2001) >> Throttle body (electronic throttle module (ETM)), replacing >> Installing >> Installing the fan shroud

Installing the fan shroud

Fig 1: Cable Harness Secured Using Tie Straps
GLL147982Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully lower the fan shroud and align with the holders. Route the cable harness behind the holder (3).

Tighten both the mounting screws

Press the hose down from the expansion tank into the holder on the fan shroud

Secure the cable harness by the fan shroud using tie straps (1) and (2). See the illustration.

Install the evaporative emission system (EVAP) valve.

Connect the engine cooling fan (FC) connectors.

scientia non olet · About LEMON Manuals