Repair cable

Fig 1: Identifying Ignition Off Position

GLL101045

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Remove relay 2/29 from the central electronic module (CEM) relay holder.
Repair the cable between fuse 11C/24 terminal #2 (10A) and relay holder 2/29 terminal #3. Check for an open-circuit.

Other information:
- To connect the breakout box, see Connecting the breakout box
- For information about signals, see Signal specification
- Checking wiring and terminals .
Fig 2: Identifying Breakout Box
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ohmmeter
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying Relays
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
OKAY: Troubleshooting has been completed.