Checking the brake fluid level sensor: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of ABLE BODY CORP.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of ABLE BODY CORP.

• Ignition off.
• Connect the connectors, install the components, etc.
• Fill brake fluid to maximum level.
• Ignition on.

  Brake fluid lamp should not be on.

Does fault still exist? 

• YES 

  Refer to Information 

• NO 

  VERIFIED:  Troubleshooting has been completed.