Fitting the torque converter screws.

Fig 1: Torque Converter Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Use new screws, Torx TX50.

Align the torque converter to the carrier plate, by turning the engine with the nut for the crankshaft's belt pulley and turning the torque converter.

Install all 6 screws, loosely. Tighten in the screws so that the screw heads almost have contact with carrier plate. Tighten acc. to: Summary of tightening torques for specific components .

NOTE:

Remove the socket wrench from the crankshaft.