Installing the B-post seat belt tensioner

Fig 1: Removing/Installing B-Post Seat Belt Tensioner

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Clean the mounting holes
• Install the seat belt using new screws
• Ensure that the rod is in the bracket
• Tighten the two screws to 48 Nm 
• Connect the connector to the seat belt tensioner
• Install the B-post panel according to Upper B-post panel .

Fig 2: Ignition On, Battery Connected And Radio Code

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Connect the battery negative terminal
• Switch on the ignition
• Enter the anti-theft radio code.