Lift the sub-frame

Fig 1: Edge Of Sub-Frame Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift: 

• the sub-frame. Use the earlier installed screws 9995517 and 9995518 . Check that the steering shaft joint does not catch in the lead-in the bodywork when the sub-frame is lifted
• the rear edge of the sub-frame (1) halfway along the tool's screw length. Now repeat at the front of the sub-frame (2)
• the sub-frame until its bushings are only a few millimeters from the frame members in same order as above.