LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 T-5, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Adjustment, Removal & Installation >> Brakes >> Brake disc front, replacing >> Front wheel hub, replacing >> Installing the control arm on the ball joint

Installing the control arm on the ball joint

Install the drive shaft in the hub. Align the ball joint against the control arm.

Release the tensioning strap between the control arms.

Install a nut on the ball joint. (M10)

NOTE:

Counterhold using the Torx wrench so as not to damage the boot.

Remove the tensioner strap.

scientia non olet · About LEMON Manuals