Parking brake, adjusting: Removal
Removing the panel
Remove the panel for the center console on the left-hand side.
Locate the adjustment for the parking brake (1).
Remove the retaining clip.
NOTE:
Take care when removing the retaining clip.
Screw the socket clockwise over the groove for the retaining clip. Press the socket back over the adjustment rod.
Screw the socket anticlockwise so that the groove for the clip emerges.
Install the clip.
Adjusting the parking brake
Depress the brake pedal to the first notch. Press out the adjustment using the adjustment rod: 9512947 .
Test the parking brake.
Full effect can be obtained between the second and fifth ratchet teeth.