Installing the lifting beam and lifting hook on the engine lifting eyelet

Fig 1: Identifying Lifting Beam And Lifting Hook Installed On Engine Lifting Eyelet

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position the lifting beams 9995716 on the wheel arch and straight above the engine's lifting lug on the left and right hand-sides. Connect the lifting hooks 9995460 on the right-hand side of the engine with a clearance of approximately 5-10 mm  . Lightly tighten on the left-hand side.

Position the wheels in the straight ahead position. Remove the ignition key. Activate the steering wheel column lock.

Raise the car.