Installing The Exhaust Pipe On The Turbocharger (TC) And The Starter Motor On The Engine

Fig 1: Identifying Exhaust Pipe To Turbocharger And Starter Motor Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the exhaust pipe on the turbocharger (TC). Use two new nuts. Tighten to 25 Nm 
• the starter motor and the screw. Tighten to 40 Nm 
• the cable on the starter motor and the nut. Tighten to 20 Nm 
• the control cable for the solenoid.

Tighten the screw for the gearbox. Tighten to 25 Nm  .