Installing The Air Hose On The Turbocharger (TC) And The Delivery Line On The Manifold

Fig 1: Identifying Turbocharger Air Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• a new nut for the exhaust flange. Tighten to 25 Nm 
• the air hose on the turbocharger (TC). Tighten the hose clamp
• the rubber hose and a new hose clamp on the evacuation pipe. Clamp the hose clamp with pliers
• the charge air pipe on the manifold. Tighten the hose clamp
• the rubber hose on the side socket on the air hose.