Measuring The Radial Play

Fig 1: Identifying Turning Secondary Masses Of Flywheel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the secondary masses of the flywheel in one direction until the spring starts to tension. Allow the flywheel to spring back.

Mark a line on both primary and secondary masses on the flywheel.

Fig 2: Identifying Turning Secondary Mass Of Flywheel In Opposite Direction

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the secondary mass of the flywheel in the same way in the opposite direction.

Mark the primary side of the flywheel in line with the marking on the secondary side.

The distance between the lines must be less than 35 mm.