High Stalling Speed

The test conditions described in Check  above, have been met. Is the acceleration time from 0-100 km/h normal?

If the stalling speed recorded exceeds the normal value by more than 300 RPM: 

Check if the oil is discolored or smells burnt. See Oil Grade, Checking .

If the oil is OK, replace the torque converter. 

See Gearbox, removing and Installing the gearbox .

Dirty oil indicates worn or burnt clutch plates. Replace the gearbox. 

See Gearbox, removing and Installing the gearbox .

Check the stalling speed again after replacing the gearbox.