Replacing The Carrier Plate: Removal
Preparatory work
Remove the transmission according to Transmission, removing .
Removing the carrier plate
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Block the carrier plate using gear sector 9995112 .
Remove:
- all screws
- the carrier plate
- gear sector 9995112 .
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Preparatory work
Remove the transmission according to Transmission, removing .
Removing the carrier plate
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Block the carrier plate using gear sector 9995112 .
Remove:
- all screws
- the carrier plate
- gear sector 9995112 .
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Preparatory work
Remove the transmission according to TRANSMISSION, REMOVING .
Removing the carrier plate
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Block the carrier plate using gear sector 9995112 .
Remove:
- all screws
- the carrier plate
- gear sector 9995112 .
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Preparatory work
Remove the transmission according to Gearbox, removing .
Removing the carrier plate
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Block the carrier plate using gear sector 9995112 .
Remove:
- all screws
- the carrier plate
- gear sector 9995112 .
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.