High Stalling Speed
The test conditions described in Check above, have been met. Is the acceleration time from 0-100 km/h normal?
If the stalling speed recorded exceeds the normal value by more than 300 RPM:
Check if the oil is discolored or smells burnt. See Oil Grade, Checking .
If the oil is OK, replace the torque converter.
For gasoline engines see Transmission, Removing and Transmission, Installation .
Dirty oil indicates worn or burnt clutch plates. Replace the transmission.
For gasoline engines see Transmission, Removing and Transmission, Installation .
Check the stalling speed again after replacing the transmission.