LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch - Removal, Replacement And Installation >> Throw Out Bearing (B5234T3, M56; B5244S, M56; B5244T3, M56; 2001) >> Throwout Bearing, Replacing >> Installing The Clutch Cylinder

Installing The Clutch Cylinder

Fig 1: Identifying Clutch Cylinder
GLL109088Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten to 10 Nm  .

Thread the rubber seal onto the pipe with the boot turned towards the clutch cylinder.

Remove the protective plug. Install the junction. Always  use a new quick-release connector with a rubber seal.

Lubricate the rubber seal using a drop of brake fluid.

Press the locking bracket into the junction. Press the junction into the pipe

scientia non olet · About LEMON Manuals