Removing Tools

Fig 1: Identifying Clutch Assembly

Courtesy of VOLVO CARS OF NORTH AMERICA.

Loosen the screw on the compression tool and remove it.

NOTE:

Keep fingers away from the three clutch rivets when removing the compression tool. There is a risk of compression damage.

Remove the hooks. Remove the counterhold.

Remove the cone from the centering tool.

Loosen the nut and then tap lightly with a plastic mallet on the centering drift so that its expander releases. Use a plastic mallet so that the threads are not damaged. Remove the centering drift.

Remove the flywheel gear sector. Check the flywheel. See

To install the transmission, see: Transmission, installing