Removing Tools

Fig 1: Identifying Clutch Assembly

Courtesy of VOLVO CARS OF NORTH AMERICA.

Slacken off and remove the screw on the compression tool.

NOTE:

Keep fingers away from the three clutch rivets when removing the compression tool. There is a risk of compression damage.

Remove the hooks. Remove the counterhold.

Remove the cone from the centering tool.

Slacken off the nut. Tap the centering tool lightly so that the expander releases. Use a rubber mallet. Use a rubber mallet so that the threads are not damaged. Remove the centering tool.

Remove the flywheel gear sector. Check the flywheel. See.

To install the transmission, see Transmission, Installation .