Installing the clutch

Fig 1: Identifying Clutch Automatic Adjustment & Counterhold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies only to certain engine versions with self adjusting clutches: 

Check that the clutch automatic adjustment is secured with counterhold 9995677 .

Applies to all clutch versions: 

Install the clutch and locate the guide pins.

Check that the clutch is in contact with the flywheel all around its circumference.

Carefully tighten the six screws, crosswise, so that the clutch is guided up onto the guide pins and lies in contact all around with the flywheel.

Tighten the screws crosswise. Tighten to 25 Nm  .