Clutch Disc And Pressure Plate: Flywheel: Removal
Preparatory work
Remove:
- transaxle Transmission, removing
- clutch Pressure Plate/Clutch Driven Plate, Replacing
Removing the flywheel
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Slacken off all the screws for the flywheel. Remove all the screws except for one.
Remove the gear sector 9995112 .
Detach the flywheel from the crankshaft. Remove the remaining screw.
Remove the flywheel.
Checking the crankshaft seal
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Preparatory work
Remove:
- transaxle Transmission, removing
- clutch Pressure Plate/Clutch Driven Plate, Replacing
Removing the flywheel
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Slacken off all the screws for the flywheel. Remove all the screws except for one.
Remove the gear sector 9995112 .
Detach the flywheel from the crankshaft. Remove the remaining screw.
Remove the flywheel.
Checking the crankshaft seal
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Preparatory work
Remove:
- transaxle Transmission, removing
- clutch Pressure Plate/Clutch Driven Plate, Replacing
Removing the flywheel
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Slacken off all the screws for the flywheel. Remove all the screws except for one.
Remove the gear sector 9995112 .
Detach the flywheel from the crankshaft. Remove the remaining screw.
Remove the flywheel.
Checking the crankshaft seal
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Preparatory work
Remove:
- transaxle Gearbox, removing
- clutch Pressure plate / clutch driven plate, replacing
Removing the flywheel
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Slacken off all the screws for the flywheel. Remove all the screws except for one.
Remove the gear sector 9995112 .
Detach the flywheel from the crankshaft. Remove the remaining screw.
Remove the flywheel.
Checking the crankshaft seal
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.