Installing Components

Fig 1: Removing/Installing Clutch Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

The new clutch cable has plastic protection on the ends. Keep these until the cable is in position in the engine compartment.

Place the clutch cable in position in the engine compartment. Press in the master cylinder. Lock using the striker plate.

Fig 2: Identifying Striker Plate & Clutch Cylinder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the cable into the clutch cylinder. Lock using the striker plate.

Fig 3: Identifying Cable & Clip

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the cable into the clip on the left-hand frame member.