Pressure Sensor Tire: Notes

Operation Number(s): 38641-2

NOTE: Removal steps in this procedure may contain installation details.

Remove the wheel.

Fig 1: Removing/Installing Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: Do not use tools within the marked area.

CAUTION: Always start outside the marked area and continue in the direction from the valve.

CAUTION: Release the tire bead from the wheel rim diagonally opposite to the valve.

Remove the tire from the rim.

Fig 2: Identifying Marked Area

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: Do not use tools within the marked area.

CAUTION: Always start outside the marked area and continue in the direction from the valve.

CAUTION: Release the tire bead from the wheel rim diagonally opposite to the valve.

Remove the tire from the rim.

Fig 3: Identifying Valve & Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Always use new valves when replacing tires.

Remove the following items:

NOTE: Always use new gaskets when replacing tires.

Install the following items:

Tighten the pressure sensor. See Tightening Torque

Fig 4: Removing/Installing Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: Do not use tools within the marked area.

CAUTION: Always start outside the marked area and continue in the direction from the valve.

Fit the tire and balance the wheel.

Install the sensor on the valve. Tighten screw. See Tightening Torque

Fig 5: Identifying Valve

Courtesy of VOLVO CARS OF NORTH AMERICA.

Brush the valve (1) with soapy water and install the valve on the rim.

Fig 6: Identifying Marked Area

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: Do not use tools within the marked area.

CAUTION: Always start outside the marked area and continue in the direction from the valve.

Fit the tire and balance the wheel.