Installing the spring

Fig 1: Compressing New Spring To A Length Of Approximately 260 mm Using Hydraulic Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Compress the new spring to a length of approx. 260 mm. Use hydraulic piston: 9512911 with claw: 9512914 .

Fig 2: Removing/Installing Fixing Nut On Shock Absorber Using Socket And A Torx-Wrench As A Counter Hold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the bump stop with the boot
• the spring
• the spring seat.

Fit the fixing nut. Tighten according to Tightening Torque . Use socket 9995469 and 3/8" torx socket as counterhold.