Spring Front, Replacement: Finishing

Fig 1: Spring Strut To Wheel Spindle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the anti-roll bar link to the spring strut. Use a new nut. Tighten according to Tightening Torque . Use a torx wrench as counterhold to prevent damaging the gaiter.
• The ABS sensor. Tighten according to Tightening Torque .

Install: 

• the ABS sensor cable in the bracket
• the wheel. See Installing Wheels .

Check and adjust the headlamps in accordance with Headlamps, Aligning .