Removing Limiter

Fig 1: Identifying Distance Between Lock Nut & Edge Of Wrench Grip

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the wheel.

Clean the boot and the surrounding area thoroughly.

Measure the distance between the lock nut and the edge of the wrench grip.

Note the measurement.

Fig 1: Connecting Rods On Steering Arm From Steering Gear

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use tool 9997019 to remove the steering arm Ensure that the connecting rods used are the same length.

Remove: 

• the steering arm from the steering gear
• the limiter.