Installing the Outer Steering Arm

Fig 1: Identifying Distance Between Lock Nut & Edge Of Wrench Grip

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the outer steering arm. Ensure that the markings and the measurements more or less correspond
• the steering arm on the wheel spindle. Use a counterhold. Tighten to 70 Nm  (steel spindle) or 80 Nm  (aluminum spindle).

Adjust so that the markings and measurement A correspond to the tightened lock nut.

Tighten the locknut

Install the wheels. See Installing Wheels .