Removing the Left Control Arm

Applies to cars equipped with the 4T65 EV/GT transmissions: 

• Remove the screw for the front motor mounting.

For all: 

• Lift up the left-hand side of the engine approximately 25 mm to expose the control arm screw. Use a mobile jack.
  NOTE: Use a wooden block as a shim.

Fig 1: Identifying Screws And Nut For Sub-Frame Control Arm

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the screws and the nut for the control arm in the sub-frame
• the control arm.