Installing lifting tools

Fig 1: Identifying Fixture 999 7018 Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the engine cover (applies only to diesels).

Make sure that the front wheels are pointing straight ahead

Lock the steering wheel by removing the ignition key

Do not turn the front wheels so that the position of the steering gear changes. This could damage the contact reel for the SRS-system.

Install lifting eye 9997018 (only applies to 6 cylinder engines).

Fig 2: Identifying Special Tool 999 5716 (Lifting Beam) And Special Tool 999 5460 (Lifting Hooks)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install lifting tools 9995716 and lifting hooks 9995460 .

Lift the engine to relieve the load on the engine pads.