Checking the connectors
- Ignition off.
Check the upper electronic module (UEM), sun roof module (SRM) and wiring connectors (54/3R and 54/13). Check for contact resistance and oxidation. Check for loose connections.
Check for damage carefully.
Reinstall the components, reconnect the connectors etc.
Ignition on.
Operate the sun roof.
Other information
- To access the upper electronic module (UEM), see Interior lighting and upper electronic module (UEM), replacing
- To access the sun roof connector, see Control module, sun roof, replacing
- See Checking wiring and terminals .
Do the sun roof controls operate?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Checking components and wiring