Checking the ground lead
- Ignition off
- Disconnect connector from the seat heater module.
Check the cable between seat heater (9/12) for left seat and (9/13) for right seat connector terminal #5 and ground terminal 31/66 or 31/67. Check for an open-circuit.
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box
- For information about signals, see Signal specification
- See Checking wiring and terminals .
Is the cable OK?
- YES
Refer to Checking the power supply
- NO
OKAY: Troubleshooting has been completed.