Checking the anti-dazzle function

NOTE:

If the upper electronic module (UEM) has been replaced software, specially developed for downloading after replacing the control module, must be downloaded to the control module before the anti-dazzle function is changed. See Interior lighting and upper electronic module (UEM), replacing .

The rear view mirror anti-dazzle function can be adjusted:

If the rear view mirror anti-dazzle function is too powerful or too weak, it can be adjusted.

Specific software for setting the anti-dazzle function must be installed in the car to do this.

Order the software. See 9499432 .

Install the software. See 9499432 .