Installing the seat rail, right hand side

Fig 1: Seat Rail, Two Screws And Seat Belt Buckle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the seat rail
two plus two screws
the spring
the two screws
the seat belt buckle. See Installing the seat belt buckle
the seat. See Removing power seats, tilting

NOTE:

Removed seat rails must always be checked for movement. Use Vernier calipers to measure from the fixed to the moving component. Both rails should have the same measurement. If not, adjust one of the rails. If the rails do not have the same measurements the seat does not run parallel. This leads to increased wear and noise.