Installing the upholstery on folding head restraints

Fig 1: Installing Head Restraint

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upholstery.

Install: 

• the Velcro strips
• the Velcro seam
• the connector
• the head restraint in the rear seat backrest
• the 2 M6 screws. Tighten.

Fig 2: Installing Head Restraint

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the cover.

Install: 

• the Velcro seams on the rear seat backrests
• the 2 side pieces.

Fold up the head restraint.

Check the folding function of the head restraint by pressing the button on the dashboard when the ignition key is in position II.