Inflatable curtain module: Removal

Fig 1: Headlining

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

The hose clamp must not be opened under any circumstances. If the clamp is opened, it will not be possible to guarantee the safety of the joint. Leakage may result which would compromise the function.

Remove:

The headlining. See Headlining, replacing .

Fig 2: Removing Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the connector according to Igniter wire connector .

Fig 3: Removing Clips D, G, Screw And Unhook Inflatable Curtain Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

clips D and G.
CAUTION:
First detach above the B-post panel.
the screw (3) and unhook the inflatable curtain module.

(6 and 7 are removed when removing the grab handle)

Fig 4: Removing Clip C And Screws 1, 2, 8 And 9

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

clip C
screws 1, 2, 8 and 9. Lift out the inflatable curtain module
NOTE:
Ground terminal (1) must always be replaced.

(4 and 5 are removed when removing the grab handle)

Fig 5: Removing Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.