LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Restraint System - General Safety Information >> Seat Belts And Other Retention Systems >> Handling Non-Deployed SRS-Components >> Seat Belts, Replacing >> Igniter wire connector

Igniter wire connector

Fig 1: Igniter Wire Connector (1 Of 2)
GLL104148

If dismantling the contact reel it is very important that the catch function on the connector is released first. Disconnection should be done in line with the attachment so as not to damage it.

NOTE:

The use of tools of any kind are not  advised when disconnecting due to an increased risk of damage to the connector.

Fig 2: Igniter Wire Connector (2 Of 2)
GLL104149

The contact is securely installed to make the contact attachment durable.

WARNING:

A damaged connector can cause failures in the function of the supplemental restraint system (SRS).

scientia non olet · About LEMON Manuals