Handling Non-Deployed SRS-Components: Handling

Fig 1: Locating Driver And Passenger Airbags

Courtesy of VOLVO CARS OF NORTH AMERICA.

WARNING: Non-deployed pyrotechnical SRS components must not be deployed or ignited inside the vehicle.

For disarming of non-deployed pyrotechnical SRS units, see Non-Triggered SRS Components, Destruction .

Individual SRS components must be removed according to the instructions for the relevant model.

For the driver's airbag (SRS) see Airbag Driver And Passenger (SRS), Replacing
For the passenger airbag (SRS) see Airbag Driver And Passenger (SRS), Replacing
For the seat airbag (SIPS) see Airbag Module Seat (SIPS), Replacing
For the inflatable curtain (IC) see IC (Inflatable Curtain) Module, Replacing
For the front seat belt tensioner, see Seat Belts, Replacing
For the rear seat belt tensioner, see Seat Belts, Replacing
For supplemental restraint system module (SRS), see Supplemental Restraint System Module (SRS), Replacing
For the steering wheel, see Steering Wheel, Replacing
For the contact reel, see Contact Reel/Steering Wheel Angle Sensor, Replacing .

WARNING: Pyrotechnical SRS components must never be taken apart, repaired or transferred to another vehicle.

WARNING: Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed SRS component. This could deploy the SRS component.