LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Dashboard & Radio Panel, Restraints - Removal, Replacement And Installation >> Seat Belts And Other Retention Systems (2001-2004) >> Seat Belts, Replacing >> Replacing Seat Belts After A Collision >> Removal

Replacing Seat Belts After A Collision: Removal

WARNING: The ignition must not be switched on when the SRS ignition cable connector is being removed or installed.
WARNING: Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed seat belt tensioner. This could deploy it.
WARNING: After a collision, the seat belt (inertia) reels and tensioners must always be replaced. This applies even if no one was seated in the passenger seat at the time of the collision.
WARNING: Seat belt tensioners must never be unscrewed, repaired or moved to another vehicle. For information about what to do with used seat belt tensioners, see Handling Non-Deployed SRS-Components .

Remove: 

For front seats, see Removing Seat Belts From the Front Seats .

For rear seats, see Removing the Rear Seat Belts .

scientia non olet · About LEMON Manuals