Checking the oil level
WARNING: This page is about a different variant/trim than selected.
NOTE:
Carry out the following check at an oil temperature of 85° 5°C. Go to car communication function group 4. Select the digital display parameter. Select the parameter for the transmission oil temperature.
Preparations:
- park the car on a level surface
- apply the parking brake
- let the engine idle
- move the gear selector lever to position P
- select each gear position, stopping for five seconds in each position
- move the gear selector lever to position P.
NOTE:
Wait two minutes before checking the level.
NOTE:
Cars with Geartronic gear selector assemblies: P-R-N-D-Man. Do not shift up in the manual positions. Cars with conventional gear selector assemblies: P-R-N-D-3-2-1. Stop for five seconds in each position.