Removing and installing the existing oil hoses

WARNING: This page is about a different variant/trim than selected.

Fig 1: Hose Installed On The Oil Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the hose and reinstall the existing hose for the oil cooler.

Reinstall the air baffle.

Lower the car.

Fig 2: Plastic Container Hanging Under Hood

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the plastic container and the oil pipe from the oil cooler.

Reinstall the existing oil hose on the oil cooler.

Checking the transmission fluid level

Check the level. See Oil level, checking .