Connecting components to the vacuum extractor

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Air Baffle And Splash Guard Under Engine

Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the car.

Remove the front air baffle.

Detach and push the lower oil hose away from the oil cooler . A small amount of oil will run out.

Fig 2: Hose Installed On The Oil Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect the loose lower oil hose to the oil cooler. Move the loose hose out of the way.

Lower the car.