Connecting cables to the seat airbag (SIPS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove the key from the discharge box and store so that it is inaccessible for unauthorized use.
Select the correct adapter cable for the airbag.
Connect the adapter cable to the airbag. Check that it is properly connected.
Check that the cable is not near the airbag.
WARNING:
Remove all loose objects on, or directly connected to, the airbag.
Lay out the connection cable so that the user is 9 m from the airbag.
Connect the adapter cable to the connection cable and fully extend the leads.
Connect the cable to the discharge box.
Connect the discharge box to a fully charged 12 V battery.