Installing the fuel pump (FP) for the engine coolant heater
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install the fuel pump (FP) unit nut and tighten the nut to an angle of 15°. Tighten to 3 Nm .
Install:
- the connector
- the fuel lines.
Complete rustproofing.